Miller® Spectrum® 375 Cutmate Plasma Welding Machine (Liquidation Sale - While Supplies Last)

Plasma Cutters

Printer-Friendly Page

1 Products


> All Categories > Welding Products > Welders & Accessories > Plasma Cutters
Miller® Spectrum® 375 Cutmate Plasma Welding Machine (Liquidation Sale - While Supplies Last)

Enlarge Image

Online Orders Only, While Supplies Last – Liquidation of floor models and out of box equipment. Pricing does not apply to new equipment. Availability subject to change without notice – All Warranties Apply – email inquiries to online.orders@airgas.com
Solid state design and Miller's reliable technology pack a ton of performance into the portable, 49 pound Spectrum® 375 CutMate. This versatile power source adapts to the shop or work site by operating on either 115 or 230 volt AC power. This machine can cut 1/2 inch mild steel with a stand off, and can drag cut 3/8 inch mild steel. With new features such as the Pilot Arc Controller, Heavy-duty work clamp, and Ergonomic ICE-27C torch, the Spectrum 375 CutMate is the clear winner in its class.

Add to Current Order

Product Literature

Overview

Pricing:

Part Number:	Price:	Extended Price:
MIL903891	~~Reg. Price: $1,151.686~~ Web Price: $1,053.670	$1,053.670
	Min Purchase Qty:
	1 Unit

Features:

Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life.
Capable of Drag Cutting quality cut (approx. 7 IPM) at 3/8" mild steel. Stand Off quality cut (approx. 7 IPM) at 1/2" mild steel.
Power Factor Correction expands operator's work area via extension cords with less nuisance tripping than previous model. Allows the Spectrum 375 CutMate to use up to 50 ft of 12 AWG extension cord on 115V, 20 Amp service and to draw 20% less current when cutting and than the previous model.
Increased Line Voltage Compensation regulates input power to a fixed value as line voltage droops or spikes by +/- 15% for steadier cuts and cleaner ending cuts.
Advanced Flashing LED indicators for pressure, power, cup and temperature allow faster troubleshooting eliminating unnecessary downtime.
Ergonomic design of ICE-27C torch with increased comfort, safety trigger, and improved swirl ring and cup. Also, accepts consumables from prior ICE-25C model torch.
Dual input voltage located in back of units allows either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position. Unit provides full cutting capacity when powered by most engine-driven welders with 240 VAC auxiliary receptacles.
Compatible with engine-driven welders capable of cutting 3/8 to 1/2 in mild steel when powered by a Miller engine-driven welder with 6000 watts, 240 V receptacle.
Starts without high-frequency so it will not interfere with controls or computers.
Postflow cooling circuit extends the life of the consumables and torch by cooling them with postflow air after the trigger is released.
Consumables storage compartment provides convenient access to consumables and parts.
Gas/air filter/regulator inside the power source provides added protection during transportation. Standard air connection on back panel for easy gas or air hookup.

Includes:

Plasma cutter
ICE-27C hand-held torch with 20 ft cable
Heavy-duty work clamp with 20 ft cable
Extra consumables (3 electrodes, 3 tips, and 1 air fitting)
Built-in gas/air filter and regulator with extra protection

Specs:

Input AC Voltage: 115V - 230V	Maximum Cutting Thickness: 1/2 in
Cutting Capacity(Text): 1/16 in	Amperage Range: 27.000 A
Duty Cycle: 35%	Gas: Air
Gas Flow SCFH: 4.50	Gas Pressure: 60 psi
Hz: 60 Hz	Phase: Single Phase
Severance: 5/8 in	Torch Lead Length: 20.0 ft
Torch Model: ICE-27C	Weight: 55 lb

Clear Checkboxes

Compare

Buy Selected

Current Item:

Select	Part Number	Product Description	Unit Price	UOM	Min Qty
	MIL903891	Miller® Spectrum® 375 Cutmate Plasma Welding Machine (Liquidation Sale - While Supplies Last)	$1,053.670	Each	1

Accessories:

Part Number	Product Description	Unit Price	UOM	Min Qty
MIL195144	Miller® Protective Cover For Spectrum 375 And Thunder	$59.486	Each	1
MIL118678	Miller® Cable Cover	Call for Price	Each	1
MIL194883	Guide, Roller Plas Torch Ice 12C, 25C, 27C, 50C, 55C & 80C	Call for Price	Each	1
MIL042306	Miller® Air Filter For Plasma	Call for Price	Each	1
MIL195981	Miller® Plamsa Cutting Guide For ICE-25C/50C/50C And 80C Torches	$125.716	Each	1
MIL195979	Miller® Plasma Cutting Guide W/Ext Air Suction/Magnet Pivot	Call for Price	Each	1
MIL119172	Miller® Model 119172 Full KVA Plug	Call for Price	Each	1
MIL073690	Plug Str Ground Armd 2P3W 15A 125	Call for Price	Each	1
MIL141432	**Receptacle Str DX Grd 2P3W 20A 125V	Call for Price	Each	1
MIL042312	Miller® Air Filter Replacement Elements (4 Per Package)	Call for Price	Each	1

Related Products:

No related products are currently available.

Clear Checkboxes

Compare

Buy Selected

Corporate Information			Customer Service			Catalogs

	Careers About Airgas News	Investor Information Services Markets		Site Locator Contacts Terms and Conditions	Privacy Statement Website Help Open an Account		Medical & Healthcare Metal Fabrication Site Map	Specialty Gases Workplace Safety Product Reference