|
|
 |
Metal Markers in a Bottle
Ball point Metal Markers are available in an unbreakable plastic bottle for marking with paint on metal, wood, plastic, glass, etc. The tough metal tip has a 1/8 in. precision stainless steel ball and comes with a plastic cap to keep the tip clean and to allow the marker to be carried in your pocket.
Marks on any surface; rusty, smooth, wet, dry or oil
Marks are durable, weather-proof and won't chip, peel, fade, or rub-off
Fast-drying
Marker is refillable
|
Ball Point Markers
Ball Point Markers feature durable aluminum tubes with non-clogging, tough, case-hardened steel points and precision 440 stainless steel balls. These handy markers will write in any position: horizontal, vertical, even overhead.
|
Felt Tip Paint Markers
Felt Tip Paint Markers dispense fast-drying, high-gloss enamel paint for permanent marking, lettering, coding and numbering of both interior and exterior surfaces. The markers are easy-to-use and convenient to carry in your pocket.
Marks on almost anything: metal, plastic, printed circuit boards, glass, wood, paper, leather, textiles, etc.
Writes on any surface: porous or non-porous, rough or smooth, wet, oily or dry.
Marks are permanent and will not, peel, fade, or rub-off. They withstand heat and weathering under adverse conditions
Unique precision valve accurately meters flow, so the right amount of paint passes through the tip
Long-lasting replaceable fiber tips allow full use of the marker
|
Solid Paint Markers & "A" Solid Paint Markers
Smooth writing Solid Paint Markers make marking smooth, fast and easy. The markers are solid sticks of paint protected by an unbreakable plastic case. They can be conveniently and cleanly carried in your pocket. The plastic case prevents the paint from drying out so it always writes easily and smooth. The case also allows you to use the entire stick without needing a separate holder.
Marks on metal, wood, plastic, glass, cardboard, textiles, etc.
Writes on any surface: rough or smooth, wet, oily or dry - even marks under water
Marks will not run
Marks are permanent and will not peel, fade or rub-off, they withstand heat and weathering under adverse conditions.
If desired, marks can be removed from non-pourous surfaces with standard industrial solvents
The Radnor® "A" Marker is a stick of paint in solid form in a cardboard holder.
Marks on metal, wood, plastic, glass, cardboard, textiles, etc.
Marks on any surface: rough, smooth, wet, oily or dry
Marks are permanent and will not peel, fade, or rub-off. They withstand heat and weathering under adverse conditions
Fast-drying, lead-free colors
Size is 11/16" x 4 7/8"
|
Back to Welding Help
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shopping Cart
Investors
Store Locator
Contact Us
Careers
Register/Login
