Hover cursor over image to view larger picture
Loading

Harris® Size 3 6290-VVC Two Piece Machine Cutting Tip

Airgas Part #:HCL1501410

Manufacturer Part #:1501410


$21.00 /Each
Each

Item Details

  • Harris® 6290-VVC Size 3 is a two-piece, propane/natural gas, chrome-plated machine cutting tip. It cuts up to 6 in. thick plate at a cutting speed of 5 in. per minute (I.P.M.) and requires 100 PSIG of cutting oxygen, 30 - 40 PSIG low-high oxygen preheat and 4 oz. - 2 PSIG of preheat fuel. This tip has a 425 SCFH cutting oxygen flow rate, 25 - 40 SCFH low preheat oxygen flow rate, 8 SCFH propane flow rate or 20 SCFH natural gas flow rate for cutting metals. The approximate kerf is .16 in. Best when used with Harris machine cutting torch model 98-6F.

Features

  • Two-piece construction machine cutting tip
  • Chrome-plated shell (.088 cup depth)
  • Minimizes kerf
  • Increases cutting speed
  • Reduces heat input
  • High quality precision machine cuts
  • Reduces after work
  • Engraved with model number and tip size for easy identification
  • Use with low cost alternate fuel gases such as propane/natural gas

Applications

  • High Speed Machine Cutting

Caution

  • Use next size larger tip with same PSIG for contour or intricate cutting
  • For thin plate cutting, use a highly carburizing preheat flame
  • Cutting oxygen pressures should be measured at torch entry
  • When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG listed

Product Attributes

Fuel Gas

» Propane
» Natural Gas

Tip Series

» 6290-VVC

Tip Size

» 3

Tip Type

» Two Piece