Loading
Harris® Size 1 6290-VVCU Two Piece Machine Cutting Tip
Airgas Part #:HCL1502126
Manufacturer Part #:1502126
$18.63
Each
$18.63
/Each
Get comparable value & performance
-
Airgas Part #:RAD64003286
Manufacturer Part #:6290-VVCU-1
RAD64003286 Soft substitute RADNOR™ 151$17.84 Each$17.84 /Each
Item Details
- Harris® 6290-VVCU Size 1 is a two-piece, propane/natural gas, Unplated machine cutting tip. It cuts up to 2 in. thick plate at a cutting speed of 13 in. per minute (I.P.M.) and requires 100 PSIG of cutting oxygen, 12 - 35 PSIG low-high oxygen preheat and 4 oz. - 2 PSIG of preheat fuel. This tip has a 200 SCFH cutting oxygen flow rate, 25 - 40 SCFH low preheat oxygen flow rate, 8 SCFH propane flow rate or 20 SCFH natural gas flow rate for cutting metals. The approximate kerf is .09 in. Best when used with Harris machine cutting torch model 98-6F.
Features
- Two-piece construction machine cutting tip
- Unplated, heavy heat-resistant shell
- Minimizes kerf
- Increases cutting speed
- Reduces heat input
- High quality precision machine cuts
- Reduces after work
- Engraved with model number and tip size for easy identification
- Use with low cost alternate fuel gases such as propane/natural gas
Applications
- High Speed Machine Cutting
Caution
- Use next size larger tip with same PSIG for contour or intricate cutting
- For thin plate cutting, use a highly carburizing preheat flame
- Cutting oxygen pressures should be measured at torch entry
- When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG listed
Product Attributes
Fuel Gas
» Propane» Natural Gas
Tip Series
» 6290-VVCUTip Size
» 1Tip Type
» Two Piece