Hover cursor over image to view larger picture
Loading

Miller® Invision™ 352 MPa Plus MIGRunner™ MIG Welder, 208/230/400/460/575 Volt, With Power Source, S-74 MPa Single Wire Feeder, Bernard™ Q400 MIG Gun With 15' Leads And XR-A Aluma-Pro™ Plus Push/Pull Air Cooled Gun With 25' Leads, MIGRunner Cart, Smith® Regulator/Flowmeter And Gas Hose

Airgas Part #:MIL951287

Miller Electric Manufacturing Co

Manufacturer #:951 287

Log in to get your price
Your price
$9,124.539 /EA - Each  ON SALE
$11,515.00 /EA - Each   Regular Price

Min Qty: 1 EA - Each

Typically in Stock

Item Details

Miller® Invision™ 352 MPa Plus MIG Welder with push-pull aluminum capability which offers easy setup by selecting the wire type with suitable DIA and gas being used and establish wire speed and strike an arc. It is applicable in the fields of heavy industrial applications, railroad, truck/trailer manufacturing, light gauge and tube, lawn and garden equipment, recreational vehicles. Unit incorporates synergic pulsed MIG that delivers connection between the power source, feeder and gun as wire speed increases/decreases, pulse parameters also increase/decrease to match the correct amount of power needed. It features alumination technology that offers use of extended reach push-pull gun for consistent, adaptable and dependable aluminum wire feeding while SharpArc technology calibrates puddle fluidity in Pulsed MIG welding. System with XR-Aluma-Pro Plus push-pull gun in 25' length for extended reach with no trouble, reliable feeding and incorporates fan-on-demand cooling system that performs only when required minimizing noise, energy use and the bulk of contaminants pulled through machine. It assimilates auto-line power management technology that admits for any input voltage hook-up having no manual linking needed, providing accessibility in any job setting and is a perfect solution for contaminated or unreliable power. Unit with ultra-tough, polycarbonate-blended cover for control panel safeguards front controls from being destructed and features profile pulse achieve stacked dime weld bead appearance without back-stepping. It possess synergic one-knob control that makes easy adjustments by setting the wire feed speed control and the system handles the rest while delivers 350 A of welding output at 60% duty cycle with ultimate low-end fulfillment. System with line voltage compensation keeps welding output consistent even if input power varies by +/- 10% and further expand line voltage compensation on 460 VAC to an amazing +37%,-59%. It features power factor of 0.95 that permits smaller fuses/ breakers and primary wiring and primary amperage draw at rated output is 25% less than the competition. Unit also features MIL243233 - 0.035" U-Groove drive rolls, MIL243234 - 0.045"/0.047" U-Groove drive rolls, Bernard™ Q400 MIG gun with 15' leads, MIL151026 -.035" V-Groove drive rolls, MIL151027 -.045" V-Groove drive rolls, MIL300405 - industrial MIG 4/0 kit with dinse connector, MIL195445 - MIGRunner™ cart. It operates at an input power of 200-208/230/460/575 V, 1 - 3 phase at 50/60 Hz and features rated output of 300 A, 32 VDC at 60% duty cycle and 350 A, 34 VDC at 60% duty cycle. Unit operates at an input current of 32 VDC at single phase and 34 VDC at 3 phase and features wire range of 0.023" - 5/64" operating at a wire feed speed of 50 - 780 IPM.

Features

  • Push pull aluminum capability easy to set up, select wire diameter, wire type and gas being used, set your wire speed and strike an arc
  • Synergic pulsed MIG provides communication between the power source, feeder and gun, as wire speed increases/decreases, the pulse parameters also increase/decrease to match the right amount of power needed
  • XR-Aluma-Pro™ plus push pull gun available in 15, 25 and 35 ft lengths for extended reach with trouble free, reliable feeding, gun is available in either air or water cooled versions
  • Alumination™ technology allows use of extended reach push pull gun for consistent, versatile and dependable aluminum wire feeding
  • SharpArc® technology fine tunes puddle fluidity in pulsed MIG (GMAW-P) welding
  • Profile Pulse™ Achieve “stacked dime” weld bead appearance without back stepping
  • Synergic “one knob” control makes adjustments easy, set the wire feed speed control and the system handles the rest
  • Exceptional electrical efficiency at 400A, efficiency is 87.24%
  • 350 A of welding output at 60% duty cycle with superior low end performance
  • Power factor of .95 enables smaller fuses/ breakers and primary wiring, primary amperage draw at rated output is 25% less than the competition
  • Ultra tough, polycarbonate blended cover for control panel protects front controls from damage
  • Dual feeder capable so you can always have two wires ready as particular jobs change, saving time and money with less set up
  • Auto-Line™ power management technology allows for any input voltage hook up (208 - 575 V) with no manual linking required, providing convenience in any job setting, ideal solution for dirty or unreliable power
  • Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine
  • Line voltage compensation keeps welding output constant even if input power varies by +/- 10% 350 MPa models further expand line voltage compensation on 460 VAC to an amazing +37%, -59%

Specifications

  • Input Power: 208/230/400/460/575V
  • Rated Output: 300 Amps, 32 Volts, 60% Duty Cycle
  • 350 Amps, 34 Volts, 60% Duty Cycle
  • Output Range: 5 - 425 Amps, 10 - 38 V
  • 1 or 3 Phase
  • 50/60 Hz

Includes

  • Invision™ 352 MPa power source
  • S-74 MPa plus single wire feeder
  • 25 ft XR-Aluma-Pro Plus air cooled gun
  • .035/.047 in U groove drive rolls
  • Bernard™ Q400 MIG Gun With 15' Leads
  • .035/.045 in V groove drive rolls
  • Smith® flowmeter/regulator with 10' (3 m) gas hose, 10' (3 m), 4/0 feeder weld cable with Dinse connector on one end and a lug on the other, 15' (4.6 m) work cable with Dinse connector on one end and 600 amp C-clamp on the other
  • MIGRunner Cart

Applications

  • Railroad
  • Truck And trailer manufacturing
  • Light gauge And tube
  • Lawn and garden equipment
  • Recreational vehicles

Product Attributes

Input AC Voltage

  • » 400V

Weight

  • » 80 lb

Process

  • » Pulsed MIG (GMAW-P)

Output AC Amps

  • » 425

Feeder Information

  • » Included

Phase

  • » 1 or 3 Phase

Duty Cycle

  • » 300 Amps at 32 Volts, 60% Duty Cycle

Output DC Amps

  • » 425

Trade Name

  • » Invision™ 352 MPa Plus MIGRunner™