| Part Number: | Price: | Extended Price: |
|---|
| RAD64002201 | Reg. Price: $269.610
Web Price: $201.209 | $201.209 | | Min Purchase Qty: | | | 1 Unit
| |
- Accepts Pointed Carbons from 5/32" to 1/2"
- Accepts Flat Carbons from 3/8" to 5/8"
- Rated to 1000 Amps Maximum
- Air Consumption of 28 cfm @ 80 psi
|
- Any process in which molten metal is spewing about obviously presents hazards. An arc-gouging operator should follow the Recommended Practices for Air-Carbon Arc Gouging and Cutting (AWS C5.3) & Recommended Safe Practices for Welding and Cutting Containers (AWS F4.1)(The American Welding Society, 550 NW Lejeune Rd., P.O. Box 351040, Miami, FL 33135). Particular attention should be paid to possible fi re hazards and flammable materials should be removed from the work area. Protective booths or screens should be set up and workers should wear the proper protective clothing, including ear plugs, especially if they are to work out-of-position.
|
|  |
- Most problems encountered in arc gouging stem from common oversights. For example, carbon deposits at the beginning of a groove are usually caused by not having the air turned on before the arc is struck. An unsteady arc, which causes the operator to travel slowly, is generally the result of insuffi cient current. An erratic groove, where the arc wanders from side to side and where the electrode overheats, is normally caused by negative polarity DC.
Intermittent arc action and resulting irregular groove surface is caused by too slow travel speed. Carbon deposits at intervals along the groove are caused by a shorting out of the electrode against the work. Slag adhering to the edges of the groove results from inadequate air pressure. A groove that becomes progressively shallower or deeper is caused by an incorrect arc length.
|
Accessory Type:
Torch
| Air Pressure:
80.00 psi
| Cable Length:
10 ft
| Rated Amperage:
Rated to 1000 amps
| Torch Type:
Pro4000
|
|
|
Shopping Cart
Investors
Store Locator
Contact Us
Careers
Register/Login
