Hover cursor over image to view larger picture
Loading

RADNOR™ Stay-Clean® 0.50 lb Bottle

Airgas Part #:RAD64001786

Manufacturer Part #:64001786


$NA.NA /NA
Bottle

Item Details

  • Stay-Clean® paste soldering flux is a general purpose soldering flux designed primarily for copper-to-copper and copper-to-brass connections. The paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay-Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering. Complies with the EU Reach and RoHS directive.

Features

  • Designed primarily for soldering copper and brass.
  • Also, effective on some grades of clean steel
  • Works well with most leaded and lead-free solder compositions.
  • Its petrolatum base paste formula allows for convenient brush application and promotes adherence on pipe and tube.
  • Stay-Clean® Paste Flux may be used in selected plumbing applications, but confirm compliance to applicable plumbing codes.
  • For applications where flux must conform to ASTM B813, use Harris Water Soluble Flux.
  • Not recommended for electrical or electronic applications
  • Density - 0.95 g/cm3
  • Working Temperature Range - 350°F - 600°F (177°C - 316°C)
  • Complies with EU Reach and RoHS directive.

Specifications

  • Fed. Spec. O-F-506, Type 1, Form A (cancelled)
  • Commercial Spec. A-51145D, Type 1, Form A

Applications

  • Stay Clean Paste Flux is effective with air-fuel torches, soldering irons/guns, and other soldering heating methods.
  • During initial heating avoid directing the flame on the flux.
  • Heat adjacent to the flux and allow heat to be conducted through the base metal.
  • Fluxing action decreases near 600°F (316°C) so avoid overheating.

Caution

  • WARNING: PROTECT YOURSELF AND OTHERS
  • Read and understand this information
  • FUMES AND GASES can be hazardous to your health
  • HEAT RAYS (infrared radiation) from flame or hot metal can injure eyes
  • Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices.
  • Avoid eye and skin contact.
  • Do not take internally
  • Keep your head out of the fumes.
  • Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area.
  • Wear correct eye, ear, and body protection.
  • See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166, OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.

Product Attributes

Alloy Material

» Brazing Flux

Trade Name

» Stay-Clean®

Weight

» 0.50 lb

Package

» Bottle