Loading
Harris® Size 7 6290-NH Two Piece Machine Unplated Cutting Tip
Airgas Part #:HCL1501140
Manufacturer Part #:1501140
$32.72
Each
$32.72
/Each
Item Details
- Harris® 6290-VVC Size 7NH is a two-piece, propane/natural gas, Unplated machine cutting tip. It cuts up to 12 in. thick plate at a cutting speed of 4 in. per minute (I.P.M.) and requires 60 PSIG of cutting oxygen, 40 - 50 PSIG low-high oxygen preheat and 4 oz. - 2 PSIG of preheat fuel. This tip has a 825 SCFH cutting oxygen flow rate, 50 - 100 SCFH low preheat oxygen flow rate, 20 SCFH propane flow rate or 50 SCFH natural gas flow rate for cutting metals. The approximate kerf is .25 in. Best when used with Harris machine cutting torch model 98-6F.
Features
- Two-piece construction machine cutting tip
- Unplated, heavy heat-resistant shell
- Minimizes kerf
- Increases cutting speed
- Reduces heat input
- High quality precision machine cuts
- Reduces after work
- Engraved with model number and tip size for easy identification
- Use with low cost alternate fuel gases such as propane/natural gas
Applications
- High Speed Machine Cutting
Caution
- Use next size larger tip with same PSIG for contour or intricate cutting
- For thin plate cutting, use a highly carburizing preheat flame
- Cutting oxygen pressures should be measured at torch entry
- When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG listed
Product Attributes
Fuel Gas
» Propane» Natural Gas
Tip Series
» 6290-NHTip Size
» 7Tip Type
» Two Piece