Features

• Portable and light weight field construction wire feeder
• CrossLinc technology provides voltage control on the feeder when paired with a CrossLinc compatible power source. No control cables are needed.
• TVT compensates for voltage drop across long weld cable lengths, allowing you to weld with the voltage you set at the feeder
• Included Tweco® or Twistmate®(Dinse®) input power connection. Flowmeter and non-flowmeter models available.
• Comes with Magnum 400 gun and .045 cored drive rolls
• Reduce job site clutter by removing cumbersome control cables
• Eliminate unnecessary movement of personnel across the worksite
• Eliminate the need to drag control cables around the site
• Full voltage control at the feeder results in the correct settings for every weld
• Accurately compensate for voltage drop across long cable runs
• Eliminate unintentional machine adjustments
• Set up faster with fewer cable connections
• Eliminate helpers or trips to the power source when making setting adjustments
• Minimize rework with easy settings adjustment
• Fully encapsulated and environmentally protected electronics
• Replaceable flame resistant case can be installed in under five minutes
• -˜Across-the-arc' models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.
• The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.