To receive the most up-to-date product availability, pricing and delivery options, enter your zip code or log in to your account
Zip Code should not be blankEmail and Password should not be blank
Enter Delivery Zip Code
or
Log In
TELL US MORE
Are you currently located in California?
8 characters minimum
One number
One lowercase letter
One uppercase letter
One special character (!@#$%&*)
Password cannot contain space
Pursuant to CA SB 478, if you are located in California, Airgas cannot display your product pricing until all items have been added to your shopping cart so that we can calculate all applicable fees, including, but not limited to, shipping and handling fees.
Stay-Clean® paste soldering flux is a general purpose soldering flux designed primarily for copper-to-copper and copper-to-brass connections. The paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay-Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering. Complies with the EU Reach and RoHS directive.
Features
Designed primarily for soldering copper and brass.
Also, effective on some grades of clean steel
Works well with most leaded and lead-free solder compositions.
Its petrolatum base paste formula allows for convenient brush application and promotes adherence on pipe and tube.
Stay-Clean® Paste Flux may be used in selected plumbing applications, but confirm compliance to applicable plumbing codes.
For applications where flux must conform to ASTM B813, use Harris Water Soluble Flux.
Not recommended for electrical or electronic applications
Density - 0.95 g/cm3
Working Temperature Range - 350°F - 600°F (177°C - 316°C)
Complies with EU Reach and RoHS directive.
Specifications
Fed. Spec. O-F-506, Type 1, Form A (cancelled)
Commercial Spec. A-51145D, Type 1, Form A
Applications
Stay Clean Paste Flux is effective with air-fuel torches, soldering irons/guns, and other soldering heating methods.
During initial heating avoid directing the flame on the flux.
Heat adjacent to the flux and allow heat to be conducted through the base metal.
Fluxing action decreases near 600°F (316°C) so avoid overheating.
Caution
WARNING: PROTECT YOURSELF AND OTHERS
Read and understand this information
FUMES AND GASES can be hazardous to your health
HEAT RAYS (infrared radiation) from flame or hot metal can injure eyes
Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices.
Avoid eye and skin contact.
Do not take internally
Keep your head out of the fumes.
Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area.
Wear correct eye, ear, and body protection.
See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166, OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.
