Hover cursor over image to view larger picture


WARNING: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Weiler® 10" X 2" Nylox® Silicon Carbide Crimped Wire Wheel Brush

Airgas Part #:WBU83330

Manufacturer Part #:83330

$218.95 /Each
Package Size Options
$437.90 Pack 2 Each / Pack

Item Details

  • Weiler® Nylox® 10" X 0.035" Silicon Carbide Crimped Filament Wheel Brush with 180 Grit and 2" arbor hole works with a wiping and filing action and rotates at a speed of 3600 RPM. Carbon brush wire with 3" trim length works best when operated at speeds that allow fairly deep penetration of the work-piece into the brush filaments. Optimum aggression is obtained and wheel life maximized when the work-piece penetrates into the face of the brush approximately 1/8 of the trim length. Good starting point for a depth of penetration between the brush face and work surface is 0.100". This depth of interference produces the best compromise between aggression and brush life. The sides of the Nylox filament actually do the work. To achieve a maximum edge radius and complete burr removal, parts should be buried into a slow running brush face. High feed rates can be achieved on soft materials and parts with small burrs. 18 inches per min is the feed rate starting point of Nylox disc brush. This feed rate should then be adjusted faster or slower to achieve optimum operating conditions. Application areas include deburring, generating specific edge radii on parts, surface finishing and light cleaning. It is sold as 2 per pack.


  • Composite metal hub construction
  • Round silicon carbide filament
  • Used to maximize brush conformability on irregular part shapes


  • ANSI B165.1


  • Precision deburring of component parts after machining or grinding
  • Improving texture characteristics on machined or ground surfaces
  • Honing cutting tools and generating specific edge profiles and radii
  • Light duty cleaning and finishing of metals
  • Light sanding of woods and composites


  • Warning: Failure to observe safety precautions may result in injury

Product Attributes

Brush Type

» Wheel Brush


» 10"


» 2"

Wire Diameter

» .035"


» 3600

Wire Type

» Silicon Carbide

Trade Mark

» Nylox®

Wire Style

» Crimped Wire

Power Tool Type

» CNC/Milling/Automatic Machines

Trim Length

» 3"