Metabo® KFMPB 15-10 F 120 Volt/13 Amp 12500 rpm Corded Beveling Tool
Airgas Part #:MTB601755620
Manufacturer Part #:601755620
- Metabo KFMPB 15-10 F
- Metal bevelling tool for chamfer heights up to 10mm for weld seam preparation with maximum user safety using a deadman switch and braking system.
- One-Touch Controller: Patented, tool-free setting of the cutting depth in 0.1" steps.
- Stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working.
- Precise setting of chamfer angle directly using the guide plate.
- Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°.
- Controlled work with large-surface guide plates.
- Stop roller to guide along pipes for easy weld seam preparation.
- Bail handle adjusts without tools for secure, even guiding.
- Metabo Long-life motor with patented dust protection for long service life.
- Tacho-Constamatic (TC)-Full Wave Electronics: Fast work progress by means of constant speed under load.
- Patented mechanical braking system stops the carbide burr within 2 seconds after switching off.
- Electronic overload protection, soft start and restart protection.
- Protection for users with metal sheet sides to deflect chips.
- 3-Year Limited Warranty
- 3 Carbide Indexable Inserts Universal
- Stopper Roller
- Screwdriver for Torx Screws 15
- Screwdriver SW 4 with T-Handle
- Open-Ended Spanner SW 10
- Bow Type Handle
- Metal Carrying Case
- Breaking and rounding of drilled and punched edges.
- Chamfering of pipes and the deburring of sheet metal with plenty of contours.
Tool Type» Beveling Tool
Power Tool Type» Corded
Tool Amperage/Voltage» 120 V
» 13 A
Trade Name» KFMPB 15-10 F
Cord Length» 13 ft.