Airgas - MIL951612 - Miller® Millermatic® 141 MIG Welder, 110 - 120 Volt 90 Amps At 18.5 Volts At 20% Duty Cycle 90 1 Phase 51 lb

Miller® Millermatic® 141 MIG Welder, 110 - 120 Volt 90 Amps At 18.5 Volts At 20% Duty Cycle 90 1 Phase 51 lb

Airgas Part #:MIL951612

Manufacturer #:951612

$955.00 /Each

Auto-Set™ : A breakthrough control that automatically sets your welder to the proper parameters
Auto-Set offers all-in-one MIG minus the hassle of finding parameters
Simply set the wire diameter, set the material thickness, and start welding!
Angled All Aluminum Drive System: Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns
Quick Select™ Drive Roll: Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire
Smooth-Start™ : This technology provides a smooth, spatter-free start.
The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up
Auto Spool Gun Detect™ : Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch
Thermal Overload and 'Tip Saver' Short Circuit Protection: Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded
Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage

Millermatic® 141
Hook-and-loop cord wraps
6.5-ft. (2 m) power cord with plug
10-ft. (3 m) MDX™ -100 MIG Welding Gun
10-ft. (3 m) work cable with clamp
Argon and AR/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Quick Select drive rolls for .024-in (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
Two contact tips for .030-in. (0.8 mm) wire
Material thickness gauge (#229 895)

Trade Name

» Miller®
» Millermatic® ® 141
» Millermatic® ®

Input AC Voltage

» 110 V
» 115 V
» 120 V

Feeder Information

» Built In

Output DC Amps (Max)

» 90

Process

» Flux Cored (FCAW)
» MIG (GMAW)

Duty Cycle

» 90 Amps At 18.5 Volts At 20% Duty Cycle

Phase

» Single Phase

Weight

» 51 lb

Miller® Millermatic® 141 MIG Welder, 110 - 120 Volt 90 Amps At 18.5 Volts At 20% Duty Cycle 90 1 Phase 51 lb