Hover cursor over image to view larger picture
Loading

WARNING

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Miller® Swingarc™ Boom Mounted Single Wire Feeder Package, 10 A/24 V AC/50/60 Hz , With Bernard® Q400 MIG Gun With 15' Leads And Drive Roll Kit, S-74 MPa Wire Feed Control Box And 12' Boom

Airgas Part #:MIL951438

Manufacturer Part #:951438


$13,680.00 /Each
Package Size Options
$13,680.00 Each
EA

Item Details

  • Miller® 12' Swingarc™ Wire Feeder Package with S-74 MPa wire feed control box, Bernard® Q400 MIG gun with 15' leads include 0.035"/0.045 drive roll. Automatic run-in control significantly improves arc starts and trigger hold permits operator to make long welds without having to hold the trigger continuously and minimizes operator fatigue. Posifeed™ offers positive wire feeding performance through use of the tool less rotatable drive assembly, calibrated drive roll pressure adjustment arm and 24 VDC high-torque, permanent-magnet motor. Alumination™ technology offers the ability to use the extended reach of a push-pull system for consistent, flexible and dependable aluminum wire feeding. Synergic-pulsed MIG operation is modified with the Invision MPa power supplies to offer communication between the power source, feeder and gun. Trigger schedule select allows the operator to switch from MIG to Pulsed MIG. Profile Pulse™ offers the cosmetic bead appearance for the welds you want to show off and achieves "stacked dime" weld bead appearance without back-stepping. Profile pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. Accu-Mate™ properly seats the power pin for excellent feeding performance and prevents Accu-Mate grooved MIG guns from sliding in the casting. It can be used for heavy manufacturing, metal fabrication, construction and light manufacturing applications. Solid aluminum wire feeder unit has a wire capacity 0.023 - 5/64" and has 50 - 780 inches per min wire speed range.

Features

  • Tool-less rotatable drive assembly allows operator to rotate the drive housing, eliminating severe bends in the wire feed path which reduce gun liner life. Also aids in feeding difficult wires
  • Automatic run-in control significantly improves arc starts
  • Trigger hold allows operator to make long welds without having to hold the trigger continuously. Reduces operator fatigue
  • Posifeed™ provides positive wire feeding performance through use of the tool less rotatable drive assembly, calibrated drive roll pressure adjustment arm and 24 VDC high-torque, permanent-magnet motor
  • Alumination™ technology gives you the ability to use the extended reach of a push-pull system for consistent, versatile and dependable aluminum wire feeding
  • Alumination gives you the versatility to handle whatever aluminum welding job you want to tackle
  • Synergic Pulsed MIG operation when optimized with the Invision MPa power supplies. Provides communication between the power source, feeder and gun
  • As wire speed increases/decreases, the pulse parameters also increase/decrease to match the right amount of power needed
  • Trigger schedule select allows the operator to select the alternative schedule by quickly tapping the gun trigger when not welding. When optimized with the Invision 352 MPa the operator can also switch from MIG to Pulsed MIG
  • Profile Pulse™ gives you the cosmetic bead appearance for the welds you want to show off
  • Achieve -œstacked dime- weld bead appearance without back-stepping
  • Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance
  • Accu-Mate™ properly seats the power pin for best feeding performance and prevents Accu-Mate grooved MIG guns from sliding in the casting

Specifications

  • (H X W X L): 14" X 35" X 12"

Includes

  • S-74 MPa Wire Feed Control Box
  • Bernard® Q400 MIG Gun With 15' Leads
  • Drive Roll Kit

Product Attributes

Input Power

» 10 A
» 24 V AC
» 50/60 Hz

MIG Wire Size

» .035" - 1/16"
» .023" - 5/64"

Wire Speed IPM

» 50 - 780"/min

Machine Model

» Swingarc™

Power Source Requirement

» CV - Constant Voltage

Suggested Power Source

» Dimension™ Series
» Deltaweld®Series
» XMT®Series
» Invision™ Mpa
» Dimension™ NT 450
» XMT®Mpa Series

Wire Type

» Aluminum
» Solid

Physical Size

» 14" X 35" X 12"

Weight

» 58 lb

Product Type

» Wire Feeder Package