RADNOR™ 3/4" X 1/4" Carbon Steel Knot Wire Mounted End Brush
Airgas Part #:RAD64000416
Manufacturer Part #:97643
- RADNOR™ Stem-Mounted Brushes have a 1/4" stem attached for easy use in die grinders and drills. They are excellent for metal cleaning and finishing recessed areas. Higher RPM rating for fast cleaning and smoother finish.
- High tensile steel wire
- Safety Goggles or full face shields worn over safety glasses with side shields must be worn by all operators and others in the area of power brush operations
- Appropriate protective clothing and equipment must be used where there is a possibility of injury that can be prevented by such clothing or equipment
- Keep all machine guards in place
- Observe all speed restrictions indicated on brushes, containers, labels or printed pertinent literature
- MSFS, "Maximum Safe Free Speed" should not be exceeded under any circumstance.
Brush Type» Mounted End Brush
Wire Diameter» .014"
Wire Type» Carbon Steel
Trade Mark» RADNOR™
Wire Style» Knot Wire
Power Tool Type» Die Grinders
Trim Length» 7/8"