Weiler® 4" X 3/8" - 24" Mighty-Mite™ Steel Crimped Wire Wheel Brush
By
Airgas Part #:WBU13078
Manufacturer Part #:13078
$24.81
Each
$24.81
/Each
Item Details
- Weiler® Trulock™ MIGhty-Mite™ 4" X 0.014" Narrow Face Crimped Wire Wheel Brush with 3/8" - 24 UNF arbor hole is intended for use on straight grinders as well as stationary machines such as bench or pedestal grinders, buffing lathes and rotates at a speed of 14000 RPM. Carbon steel brush with a trim length of 7/8" has a solid ring construction that ensures the brush will run smoother and last longer, even in the toughest application situations. It provides a flexible brushing action and a consistent performance for demanding light-duty cleaning and deburring applications. The product line consists of wheel, cup and bevel brushes which have been specifically designed for use on high speed tools. Tube brush cleans surfaces in the same manner as sand blasting. Due to its high rotating speed, it separates surface contaminants from base material and does not remove base material or change part dimensions. Unlike non-woven, bonded and coated abrasives, wire brushes will not load when brushing soft materials or when used to remove paint and similar coatings. Application areas include cleaning rust, scale and oxidation, deburring, weld cleaning, roughening surfaces, edge blending and surface preparation.
Features
- Solid ring construction
- Provide a flexible brushing action and consistent performance
Specifications
- ANSI B165.1
Applications
- Removing rust and light corrosion
- Surface prep prior to welding
- Decorative finishing
- Removing heat discoloration and welding residuals
- Light duty cleaning and deburring
- Edge blending
- Roughening for adhesion
- Cleaning rust/scale and dirt
Caution
- Warning: Failure to observe safety precautions may result in injury
Product Attributes
Brush Type
» Wheel BrushDiameter
» 4"Arbor/Stem
» 3/8" - 24"Wire Diameter
» .014"RPM
» 14000Wire Type
» SteelTrade Mark
» Mighty-Mite™Wire Style
» Crimped WirePower Tool Type
» Right Angle GrindersTrim Length
» 7/8"