Steelmax® 1/2" X 2" Annular Cutter
Airgas Part #:RGMAC-05000-2
Manufacturer Part #:SM-AC-05000-2
THIS PRODUCT ALSO OFFERS CONSIDERABLE VALUE AND PERFORMANCE.
RADNOR™ 1/2" X 2" RADNOR™ Annular Cutter With Pilot Pin
Airgas Part #: RAD64000969RGMAC-05000-2 Suggested SteelMax 67
- Steelmax® 1/2" High Speed Steel Annular Cutter with 2" depth of cut capacity. Steelmax HSS cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and a less brittle character compared to other M2 formulations, such as those using a cobalt additive. HSS cutters are most cost effective for mild steel applications and holes up to 2-3/8? in diameter in material up to 2? thick. HSS annular cutters can be re-sharpened to extend cutter life. All Steelmax cutters ship with a pilot pin installed at no extra charge.
- Eliminates costly and time consuming step-drilling
- Significantly less drilling time: 3-4 times faster than twist drills
- Longer tool life: 5-10 times as many holes as a comparable twist drill bit
- More accurate and higher quality holes: Burr-free with no clean up
- Easily drill on curved surfaces such as pipe or tubing
- Create overlapping holes
- Lower machine and horsepower requirements when compared to twist drills
Product Type» Annular Cutter
Depth of Cut» 2"