Features

• SureLOK™ Electrode Technology
• The innovative, patented, self-locking electrode mechanism eliminates the need for an installation tool and ensures precise electrode and tip alignment. Both the electrode and tip are stationary which results in a highly defined arc and precise cuts. SureLok alignment also means longer tip and electrode life and reduced operating costs. Total Gas Management™
• The SL100 degreesSV 1Torch™ introduces a completely new tip technology which eliminates the need for a separate plasma gas distributor. Each tip includes plasma gas ports uniquely tuned to optimize cutting performance at its rated current. Select from 20,30,40,60,80, 100 or 120 Amp tips to optimize your cutting. The result is Total Gas Management.
• Precision gas control, longer consumable parts life and better cut performance.
• Superior Quality at All Amperages Whether you are fabricating thick plate or cutting ornamental shapes, the Cutmaster™ Automation Series is perfect for the job.
• At 120 Amp output, the CUTMASTER A120 produces the BEST CUT on 1/2" (12 mm) mild steel plate at 70 IPM (1. 86m/min). For those cutting intricate shapes, select low amperage tips for kerf widths less than 0. 045" (1, 14 mm) wide.
• Whether you cut plate, HVAC duct work or ornamental shapes, the CUTMASTER Automation Series is right for you. Start Cartridge
• High Frequency has been completely eliminated from the plasma system. A patented component called the - Start Cartridge- sits between the tip and electrode. The Start
• Cartridge is in contact with the tip while the torch is inactive. When a start signal is given, air forces the cartridge to break contact with the tip and the pilot arc is started. This unique design allows the pilot arc to start without moving either the tip or electrode, resulting in better parts life, cut performance and reliability.
• The start cartridge is the only moving part in the SL100SV torch. Unlike competitive torches, where the moving part is in the torch head. If the moving parts of a competitor's torch fails, the entire torch head has to be replaced. This is expensive, complicated, and time consuming.
• Choice of Tip Shielding
• Choose from two consumable styles Exposed Tip for cutting thin sheet at low power and narrow kerf
• Shielded Tip for heavier plate piercing and cutting
• Front Panel LEDs indicate status conditions for maximum efficiency.
• Storage compartment for convenient access to spare parts and consumables
• Multi-voltage allows operation from 208 to 460 Volts in a single power supply.
• Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
• Lighter weight design for maximum portability