Airgas - HYP420276 - Hypertherm® 220 - 300 Amp Electrode For Use With XPR™

Hypertherm® 220 - 300 Amp Electrode For Use With XPR™

Airgas Part #:HYP420276

Manufacturer Part #:420276

$NA.NA /NA

QuickLock™ Technology: 1/4-turn locking mechanism for threadless installation and concentric alignment
Arc Response Technology™: Automatic system response to ramp-down errors to prevent electrode blowout
Hafnium Emitter: High-temperature insert matched to 300A power levels for controlled erosion
Hollow Milled Post: Internal geometry designed for alignment with water tube and optimized coolant flow
Laser Identification: Laser-etched part number and batch code for traceability
Automatic Torch Protection: System-level sensing to prevent catastrophic failure from electrode overuse
True Hole® Technology Integration: Supports ISO Range 2/3 bolt hole quality in mild steel (3 mm to 25 mm)
Vented Water Injection™ (VWI) Compatibility: Supports optimized cutting processes for non-ferrous and mild steel
Environmental Compliance: 99.5% recyclable system design
Resource Efficiency: Consumable design utilizes 64% less copper per foot of cut compared to previous generations
ISO 9001:2015: Manufactured under certified Quality Management Systems
Regulatory Compliance: Meets CSA C22.2 No. 60974-1 and ANSI/NEMA/IEC 60974-1 standards

Compatible Systems: XPR300, XPR170
Operating Amperage: 220 Amps, 300 Amps
Material Application: Mild Steel
Process Gas: O2 / Air (Oxygen Plasma / Air Shield)
Cooling Method: Liquid-cooled
Required Water Tube: 420368
Net Weight: 0.017 lbs (0.0077 kg)
Country of Origin: United States
HS Code: 8466.93.6000
Duty Cycle: 100% at 66.5 kW (40° C)
Maximum Open-Circuit Voltage (U0): 360 VDC
Output Voltage Range: 50 VDC – 210 VDC
100% Duty Arc Voltage: 210 V
Power Factor: 0.98 at 66.5 kW
Operational Ambient Temperature Range: -10° C to 40° C (14° F to 104° F)
Pierce Capacity (Mild Steel, Argon-assist): 50 mm (2")
Pierce Capacity (Mild Steel, Standard O2): 45 mm (1-3/4")
Severance Capacity (Mild Steel): 80 mm (3-1/8")
300A Cutting Speed (12 mm): 3940 mm/min (155 ipm)
300A Cutting Speed (25 mm): 1950 mm/min (75 ipm)
300A Cutting Speed (50 mm): 560 mm/min (21 ipm)
300A Cutting Speed (80 mm): 165 mm/min (7 ipm)
170A Cutting Speed (12 mm): 3061 mm/min (115 ipm)
170A Cutting Speed (25 mm): 1175 mm/min (45 ipm)
170A Cutting Speed (50 mm): 267 mm/min (10 ipm)
220A Stack-up: Shield 420273, Nozzle 420270, Swirl Ring 420406
300A Stack-up: Shield 420491, Nozzle 420279, Swirl Ring 420406
Common Stack-up Components: Shield Cap 420200, Nozzle Retaining Cap 420365, Water Tube 420368

Torch Amperage

» 220 - 300 A

Torch Model

» XPR™

Product Type

» Electrode

Are you currently located in California?