Hover cursor over image to view larger picture
Loading
Hobart® Handler® 210 MVP MIG Welder, 115 - 230 Volt 150 Amps At 23 Volts At 30% Duty Cycle 210 Single Phase 76.5 lb

WARNING

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Hobart® Handler® 210 MVP MIG Welder, 115 - 230 Volt 150 Amps At 23 Volts At 30% Duty Cycle 210 Single Phase 76.5 lb

Airgas Part #:MIL500553

Miller Electric Manufacturing

Manufacturer #:500553

Datasheet

$966.00 /Each
Package Size: 1 Each
$966.00 Each
$966.00 Each

Typically in Stock

Item Details

  • Hobart® Handler® 210 MIG Welder is ideal for maintenance, construction, auto body, farm/ranch, boat/marine and home. Welder includes power cord with plug, built-in gas valve, dual gauge regulator and gas hose, 10' (3 m) work cable with clamp, sample spool of 0.030" (0.8 mm) self-shielded flux cored welding wire, 8" (203 mm) wire spool adapter, weld set-up chart and extra 0.030" (0.8 mm) contact tips. Single phase welding machine provides 150A at 23V with 30% duty cycle and 90A at 19V with 20% duty cycle and output current of 210A DC. It has built-in contactor for excellent safety that feature which makes wire electrically "cold" when not welding. Welder features dual voltage input 115V/230V with the MVP plug makes the unit effortless to find a place to plug it in. A Max 210A output in a small portable case makes transporting to job sites effortless and provides power to weld 3/8" steel. It has 7 Voltage selections (230V), 4 voltage selections (115V), enhanced magnetics and infinite wire feed speed control provides easier fine control for improved arc performance with less spatter for a better bead appearance and less cleanup. Spool gun control circuitry is built-in to the Handler® 210MVP for the optional Spool Runner™ 100 direct plug-in spool gun. It relieves feeding problems with soft aluminum wires and is available with mild or stainless steel welding wires. Welder offers easy access to polarity changeover contains storage holes for spare tips and features dual groove drive rolls make it effortless to switch from one wire size to another. The one knurled along with smooth groove for 0.030" - 0.035" (0.8-0.9 mm) wire and has self-resetting thermal overload as well as motor protection for safety. Multi voltage plug (MVP) provides flexibility to use either 115V or 230V input power.

Features

  • Max 210 amps in small, portable case sized for transport of the unit to the job site and the power to weld 3/8 in mild steel
  • 7 voltage selections permit easier fine control of the output parameters for improved arc, less spatter, better bead appearance, excellent penetration and minimal post weld cleanup
  • Direct plug spool gun circuitry standard optional Spool Runner™ 100 spool gun plugs directly into the handler 210 MVP no additional adapters or control boxes needed just remove the standard MIG gun and replace it with the optional Spool Runner™ 100 spool gun, flip the switch on the center panel from MIG gun- to spool gun- and you're ready to go
  • Proven built in wire feeder with quick release tension lever provides positive feed with adjustable tension, easy access for threading wire
  • Replaceable, built in contactor eases use and excellent safety feature, makes the welding wire electrically cold- when not pulling the trigger
  • Convenient polarity changeover with tip holder access makes it quick and easy to change polarity when switching from solid wire to flux cored wire, includes convenient storage holes for spare tips
  • Quick change, dual groove drive rolls easy to change from one wire diameter to another .023/.025 in or .030 - .035 in
  • Short circuit protection protects the unit against current overload
  • Self resetting thermal overload protects power transformer to ensure reliability
  • Solid state motor protection protects wire feed system from overload
  • 5/3/1 Industrial warranty and technical assistance five year warranty on transformer and stabilizer, three years on electronics (drive motors, PC boards) and one year on MIG gun, worldwide service network and 1-800-332-3281 Tech Help Line for prompt service and assistance
  • Hobart exclusive multi voltage plug (MVP™ ) allows you to connect to common 115 or 230 V power receptacles without the use of any tools simply choose the plug that fits the receptacle and connect it to the power cord

Specifications

  • Input Power: 115/230V
  • Rated Output: 150 Amps at 23 Volts, 30% Duty Cycle
  • Output Range: 25 - 210 Amps, 115 V
  • Single Phase
  • 60 Hz

Includes

  • Hobart Handler® 210 MVP MIG welding power source
  • Durable built in wire feeder
  • MVP plug for 115 volt or 230 volt input power
  • Integrated spool gun control circuitry with selector switch for MIG gun or spool gun operation
  • built in gas solenoid valve
  • Dual gauge regulator and gas hose
  • 10 ft H100S4-10 MIG gun
  • 10 ft work lead with clamp
  • Spare .030 in contact tips
  • Sample spool of .030 in self shielding flux cored welding wire
  • Weld set up and information chart
  • Owner's manual with parts lists, installation, operation, maintenance and MIG welding guidelines

Applications

  • Maintenance
  • Construction
  • Auto body
  • Farm/Ranch
  • Rental
  • Home applications

Product Attributes

Trade Name

» Hobart®
» Handler® 210MVP
» Handler®

Input AC Voltage

» 115 V
» 230 V

Feeder Information

» Built In

Output DC Amps (Max)

» 210

Process

» Flux Cored (FCAW)
» MIG (GMAW)

Duty Cycle

» 150 Amps At 23 Volts At 30% Duty Cycle

Phase

» Single Phase

Weight

» 76.5 lb

» Show more details and specs