Airgas - MIL951821 - Miller® Millermatic® 255 MIG Welder, 208 - 240 Volt 230 Amp At 25.5 Volt At 60% Duty Cycle 300 Single Phase 148 lb

Miller® Millermatic® 255 MIG Welder, 208 - 240 Volt 230 Amp At 25.5 Volt At 60% Duty Cycle 300 Single Phase 148 lb

Airgas Part #:MIL951821

Manufacturer #:951821

$8,602.00 /Each

Easy-to-understand interface with 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
Auto-Set™ Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels
Program mode allows easy save and recall of favorite weld settings
Weld capability (short circuit, pulsed) and parameters capable of handling mixed materials (steel, silicon bronze, aluminum) to meet the repair needs in today’s vehicles
For versatility and reliability Auto-Line™ allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting
Ideal solution for dirty or unreliable power
Pulsed MIG welding delivers higher quality welds for ALL welders

Power source with 10 ft. (3 m) industrial power cord
10 ft. (3 m) work cable with clamp and 50 mm Dinse-style connector
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun for steel wire
10 ft. (3 m) 100-amp MDX™-100 MIG gun for silicon bronze wire
12 ft. (3.7 m) 200-amp Bernard® BTB™ Gun 200 A for aluminum wire
Flow gauge regulators and gas hoses for argon and argon/CO2 mix
.024 in. (0.6 mm) V-groove drive rolls for steel wire
.030/.035 in. (0.8/0.9 mm) reversible V-groove
Drive rolls for steel and silicon bronze wire
.035/.047 in. (0.9/1.2 mm) reversible U-groove drive rolls for aluminum wire
MDX gun consumables for .024 in. (0.6 mm) wire MDX gun consumables for .030 in. (0.8 mm) wire
MDX gun consumables for .035 in. (0.9 mm) wire BTB gun Centerfire™ consumables for .047 in. (1.2 mm) wire
8 in./10 lb. spool of .030 in. steel wire
8 in./5 lb. spool of .035 in. silicon bronze wire
8 in./5 lb. spool of .047 in. 5554 aluminum wire
Material thickness gauge
EZ-Latch™ dual cylinder running gear cart withelevated gun and cable rack
Chains to secure gas cylinder
Protective cover
Millermatic setup guide

Trade Name

» Millermatic® 255
» Millermatic®

Input AC Voltage

» 208 V
» 240 V

Feeder Information

» Included

Output DC Amps (Max)

» 300

Process

» Flux Cored (FCAW)
» MIG (GMAW)
» Pulsed MIG (GMAW-P)

Duty Cycle

» 230 Amp At 25.5 Volt At 60% Duty Cycle

Phase

» Single Phase

Weight

» 148 lb

Miller® Millermatic® 255 MIG Welder, 208 - 240 Volt 230 Amp At 25.5 Volt At 60% Duty Cycle 300 Single Phase 148 lb