Features

• Advanced Features for the Professional Welder - Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion.
• Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications.
• Lift-Arc™ TIG provides arc starting that minimizes the risk of electrode/work contamination without the need for high frequency.
• Welder friendly control panel - Process selector switch reduces the number of control setup combinations without reducing any features.
• Ultra-tough, polycarbonate-blended cover protects front controls from damage.
• Large, dual digital meters are easy to view and presettable to ease setting weld output.
• Standard 14-pin Receptacle - Has the flexibility to be used with spool guns, feeders, and remote controls.
• Added Features - 70 Series MPa wire feeder provides synergic pulsed MIG - as you increase/decrease the wire feed speed, the pulse parameters increase/decrease, matching the right amount of power output to match the wire speed, eliminating the need to make additional adjustments.
• 70 Series MPa adds wire deposition capabilities with Insight Core™.
• XR-AlumaFeed™ wire feeder provides Profile Pulse™ - TIG appearance with MIG simplicity and productivity.
• Achieve “stacked dimes” without gun manipulation.
• Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
• SharpArc® Technology - Controls the arc in Pulsed MIG (GMAW-P) welding and gives total control over the arc cone shape, puddle fluidity, and bead profile.
• Output connector choices - Dinse- or Tweco®-style weld cable connectors provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.)
• Wind Tunnel Technology™ - Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
• Built-in Pulse programs - Provide reduced heat affected zone, weld in all positions, great for thick-to-thin metal, good gap filling ability and faster travel speeds and deposition.
• Auto-Line™ Technology - Allows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.