RADNOR™ .023 - .045" X 1.99" 11 Style Gas Diffuser
By
Airgas Part #:RAD64002720
Manufacturer Part #:51
$4.83
Each
$4.83
/Each
Item Details
- RADNOR™ Standard Duty Brass Gas Diffuser is suitable to function properly with 180 A Tweco® No. 1 as well as RADNOR™ MIG guns. Diffuser assures a consistent dimensional stability with its 360-brass alloy bar stock construction and is contoured to be used with thread on nozzle assemblies. Diffuser finds application in light to medium duty welding and is sold as 5 per pack.
Features
- Easy identification - part no rolled stamped on the outside surface
- A machined thread is on the outside surface to allow the nozzle assemblies to thread over holding the nozzle in place during the welding process
- Designed to be used with thread on nozzle assemblies
- Machined from 360 brass alloy bar stock to ensure consistent dimensional stability
- Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
- Flush tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece
- Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
- However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Applications
- Used in light to medium duty welding application up to 180 Amp
- Use with thread on nozzle assemblies
Product Attributes
Consumables Type
» Gas DiffuserMIG Gun Model
» Tweco® MiniMIG Wire Size
» .023 - .045"Length
» 1.99"Series
» 11