To receive the most up-to-date product availability, pricing and delivery options, enter your zip code or log in to your account
Zip Code should not be blankEmail and Password should not be blank
Enter Delivery Zip Code
or
Log In
TELL US MORE
Are you currently located in California?
8 characters minimum
One number
One lowercase letter
One uppercase letter
One special character (!@#$%&*)
Password cannot contain space
Pursuant to CA SB 478, if you are located in California, Airgas cannot display your product pricing until all items have been added to your shopping cart so that we can calculate all applicable fees, including, but not limited to, shipping and handling fees.
Tweco® 14 Series Standard Duty Copper Gas Diffuser with 450 A Tweco® can be use for No.3/4 MIG gun series as well as eliminator front-end consumables. Gas diffuser has magnificent electrical properties making it ideal for use in medium to heavy duty standard welding application up to 450 A. 1.25" Gas diffuser with 3/8" - 24UNF - 2A thread size has six 0.094" gas holes. It features part number rolled stamped on the external surface and overall length for easy identification. Gas diffuser is made from 360-brass alloy bar stock offers consistent dimensional stability. Gas diffuser features a conduit set screw that can accommodate the conduit liner in place. It has a proper threaded conductor tube to use with MIG guns. Gas diffuser is sold as 5 per pack.
Features
Easy identification - part no rolled stamped on the outside surface
Machined from hex 145 tellurium copper alloy bar stock to ensure consistent dimensional stability
Contains a conduit set screw used to hold the conduit liner in place
Recessed tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece
Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Applications
Used in medium to heavy duty welding application up to 450 Amp