Hover cursor over image to view larger picture
Loading

Miller® ArcReach®/XMT® 350 FieldPro Wire Feeder, 14 - 48 VDC/110 OCV

Airgas Part #:MIL951729001

Manufacturer Part #:951729001


$NA.NA /NA
Each

Item Details

  • Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller® XMT® 350 FieldPro systems with ArcReach® technology - and improve your bottom line!

Features

  • More Jobsite Productivity and Efficiency - ArcReach® capabilities eliminate the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make adjustments at the ArcReach® wire feeder or remote.
  • Cable Length Compensation - Cable Length Compensation (CLC™) ensures that the voltage a weld operator sets is the voltage they get by automatically adjusting voltage based on weld cable length, even hundreds of feet away from the power source.
  • Setting the Standard for Performance - Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next, which provides consistent arc quality. Front panel has trigger hold, wire jog, and gas purge for easy operator access. Wide voltage range for small and large wires with no contactor chatter or arc outages.
  • Unique and Durable Case - Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants. Built-in slide rails allow you to drag the feeder into position for welding. Innovative feeder door design allows you to change wire while feeder is standing upright or laying down.
  • Extreme Reliability - Potted and trayed main printed circuit board for the harshest environment adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun. Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
  • Ultra-low Drag Inlet Guide Pins - Makes loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance.
  • Scaled Wire Pressure Knob - Provides easy adjustment and consistent pressure on the drive rolls and wire.
  • Digital Meters with SunVision™ Technology - Display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
  • Sizing - 12VS model is sized for an 8- or 12-inch spool of wire. 12-inch spools are the most common in structural steel and fabrication.
  • AccuLock S Consumables - AccuLock can transform the way businesses manage their MIG welding gun consumables - helping to optimize productivity, operating costs, and welder confidence. Less tip changes, less troubleshooting, and more beads worth bragging about!

Includes

  • .045" - 1/16 reversible dual VK drive rolls
  • ArcReach® SuitCase® 12
  • Bernard™ BTB Gun 300 AMP, 15FT
  • Centerfire™ contact tips, .045 (QTY 3), .052 (QTY 2)

Applications

  • Shipbuilding
  • Construction
  • Heavy manufacturing
  • Rental

Product Attributes

Input Power

» 14 - 48 VDC
» 110 OCV

MIG Wire Size

» Solid wire .023" - .052"
» Flux-cored .030" - 5/64"

Wire Speed IPM

» 50 - 780"/min

Machine Model

» ArcReach®
» XMT® 350 FieldPro

Power Source Requirement

» CC - Constant Current
» CV - Constant Voltage
» DC - Direct Current

Suggested Power Source

» XMT® 350 FieldPro

Weight

» 35 lb

Product Type

» Wire Feeder